Profile RDTA

The Profile RDTA with its staggering 6.2mm capacity and 25mm diameter certainly ticks the boxes.  It's fed by Stainless Steel wicks to avoid too much cotton wicking, and it takes single mesh and traditional coils.  The RDTA’s fill port sits just below the deck slots and is easily accessible by lifting off the top cap and because there's a pressure valve opposite the port, it'll fill up with little if any bubbling so you can use the full 6.2m.

It also introduces a new nexMesh option in Clapton, made up of strands of wire for exceptional surface area that'll equal exceptional flavour and, you can twist it apart and use it in RDA mode that's FULLY squonk compatible!  

The whole thing has amazing honeycomb airflow, ensuring those small pin holes condense the air just where it needs to be across your coils or mesh.

 So, what's in the Box!

• 1 x Wotofo Profile RDTA
• 1 x piece of nexMESH Piece Clapton Ni80 + KA1 0.2 ohm
• 1 x piece of nexMESH Extreme KA1 0.16Ohm
• 1 x piece of nexMESH Turbo KA1 0.13Ohm
• 2 x Framed Staple Clapton Coils Ni80 0.33 ohm (per piece, ~0.16Ohm dual)
• 2 x 6mm Diameter Cotton Strips (for mesh pieces)
• 2 x 3mm Diameter Cotton Strips (for traditional coils)
• 6 x Stainless Steel Wicks: 4 pre-installed, 2 spares
• 1 x Coil Trimming Tool
• 1 x Mesh Bending Tool
• 1 x RDA Adapter
• 1 x Cross Head Screwdriver Allen Key
• Spares Bag: O-rings, screws
• User Manual